Share:
Specifications
SKU: 11762039
| Parameter | Description | Value | Unit |
|---|---|---|---|
| Operating Voltage | Supply voltage range for the device | 1.8 to 3.6 | V |
| Operating Temperature | Range of temperatures in which the device can operate | -40 to +85 | °C |
| RF Input Power | Maximum RF input power | +20 | dBm |
| Sensitivity | Minimum signal level required for satisfactory performance | -107.5 | dBuV |
| Image Rejection | Ability to reject unwanted signals at the image frequency | >45 | dB |
| Adjacent Channel Rejection | Rejection of adjacent channel interference | >70 | dB |
| IF Output Level | Intermediate Frequency output level | Variable | dBuV |
| Audio Output Power | Maximum audio output power | 10 | mW |
| Audio SNR | Signal-to-Noise Ratio of the audio output | 55 | dB |
| Package Type | Type of packaging | QFN (Quad Flat No-leads) | |
| Pin Count | Number of pins | 40 |
Instructions for SI4686DY:
Power Supply:
- Ensure the supply voltage is within the specified operating range of 1.8V to 3.6V.
- Use appropriate decoupling capacitors close to the power supply pins to minimize noise.
Installation and Handling:
- Handle the device with care to avoid static damage. Use anti-static precautions.
- Follow the manufacturer’s guidelines for soldering and mounting to ensure reliable operation.
RF Input Connection:
- Connect the RF input through a suitable matching network to optimize performance.
- Shield the RF input line to prevent interference.
Audio Output Configuration:
- Adjust the audio output settings according to the requirements of your application.
- Use external components as recommended by the datasheet to achieve desired audio quality.
Operating Environment:
- Operate the device within the specified temperature range to avoid thermal stress.
- Provide adequate ventilation or cooling if operating in high-temperature environments.
Firmware and Configuration:
- Load the appropriate firmware into the device using the provided programming interface.
- Configure operational parameters via I2C or SPI interfaces as per the application needs.
Testing and Validation:
- After installation, perform initial tests to verify correct operation.
- Regularly validate performance parameters to ensure ongoing reliability.
For detailed specifications and advanced configurations, refer to the official datasheet and application notes provided by Silicon Labs.
(For reference only)Inquiry - SI4686DY
