Share:
Specifications
SKU: 10256234
| Parameter | Description | Value/Options |
|---|---|---|
| Device | Digital Signal Controller | TMS320F28335PTPQ |
| Package Type | Package Style | TQFP (Thin Quad Flatpack) |
| Pin Count | Number of Pins | 144 |
| Core | Processor Core | C28x |
| Clock Speed | Maximum Clock Frequency | 150 MHz |
| Flash Memory | On-chip Flash Memory Size | 128 KB |
| RAM | On-chip RAM Size | 18 KB |
| ADC Channels | Analog-to-Digital Converter Channels | 16 channels |
| PWM Channels | Pulse Width Modulation Channels | 6 fully independent ePWM modules |
| Communication Interfaces | Available Communication Interfaces | SPI, I2C, SCI, CAN, LIN |
| Operating Temperature | Operating Temperature Range | -40°C to 105°C |
| Supply Voltage | Supply Voltage Range | 3.0V to 3.6V |
| I/O Voltage | Input/Output Voltage Levels | 3.3V |
| Capacitive Touch | Capacitive Touch Inputs | Supported |
| Timer | General Purpose Timers | 6 x 16-bit timers |
Instructions for Use
Power Supply Setup:
- Ensure the supply voltage is within the specified range (3.0V to 3.6V).
- Connect a stable power source to the VDD and GND pins.
Clock Configuration:
- Configure the clock settings in your code to match the desired operating frequency up to 150 MHz.
- Utilize the internal oscillator or external crystal as needed.
Memory Initialization:
- Initialize flash memory and RAM according to your application requirements.
- Load firmware into flash memory using appropriate programming tools.
Peripheral Configuration:
- Configure ADC, PWM, and communication interfaces (SPI, I2C, SCI, CAN, LIN) based on your application needs.
- Set up timer modules for timing control and signal generation.
Programming Environment:
- Use Code Composer Studio (CCS) or other compatible IDEs for writing and debugging code.
- Refer to the device-specific libraries and examples provided by Texas Instruments.
Testing and Debugging:
- Test each peripheral and functionality individually to ensure correct configuration.
- Use debugging tools available in CCS for troubleshooting and optimization.
Safety and Handling:
- Handle the device with care to avoid electrostatic discharge (ESD) damage.
- Follow recommended guidelines for PCB layout and component placement.
For detailed specifications and advanced configurations, refer to the official datasheet and user guides provided by Texas Instruments.
(For reference only)Inquiry - TMS320F28335PTPQ
