Share:
Specifications
SKU: 8800607
| Parameter | Description | Value/Details |
|---|---|---|
| Model Number | Model identification | MCC312-18IO1 |
| Input Channels | Number of analog input channels | 12 |
| Resolution | ADC resolution | 16-bit |
| Sample Rate | Maximum sample rate per channel | Up to 200 kS/s |
| Input Range | Voltage range for analog inputs | ±10 V |
| Isolation | Channel-to-channel and channel-to-ground isolation | 2500 Vrms |
| Digital I/O | Number of digital I/O lines | 6 |
| Power Supply | Operating voltage | 5 V DC |
| Current Draw | Typical current consumption | 100 mA |
| Operating Temp. | Temperature range for operation | -40°C to +85°C |
| Dimensions | Product dimensions (LxWxH) | 100 mm x 60 mm x 20 mm |
| Weight | Product weight | 100 g |
Instructions:
- Power Connection: Connect the device to a stable 5V DC power supply. Ensure the power supply can provide sufficient current as specified.
- Analog Input Configuration: Connect your analog signals to the appropriate input channels. Verify that the signal levels are within the supported input range of ±10 V.
- Digital I/O Setup: Configure the digital I/O lines according to your application requirements. Refer to the programming manual for detailed setup instructions.
- Software Installation: Install the provided software drivers and configuration tools on your computer. This will allow you to set up and control the MCC312-18IO1 via USB or Ethernet.
- Operation: Use the configuration software to set parameters such as sample rate, input range, and trigger conditions. Start data acquisition and monitor the results through the software interface.
- Safety Precautions: Always ensure that the input voltages do not exceed the specified limits to prevent damage to the device. Handle the device with care to avoid physical damage.
Inquiry - MCC312-18io1
