Instructions for LM1117IMP-3.3

1. Mounting and Layout:

   • Ensure proper heat sinking if operating at high output currents.
   • Place input and output capacitors close to the device.

2. Input Capacitor:

   • A 1 μF tantalum capacitor is recommended for stability.
   • For better transient response, a ceramic capacitor (e.g., 0.33 μF) can be added in parallel.

3. Output Capacitor:

   • A 10 μF tantalum capacitor is suggested for optimal performance.
   • Larger values improve load regulation but may increase startup time.

4. Application Notes:

   • The LM1117IMP-3.3 is designed for low dropout operation, making it suitable for battery-powered applications.
   • Ensure that the input voltage exceeds the output voltage by at least the dropout voltage to maintain regulation.

5. Handling Precautions:

   • This device is sensitive to electrostatic discharge (ESD); handle with care.
   • Avoid exceeding maximum ratings to prevent damage or reduced lifespan.

6. Storage:

   • Store in original packaging until ready for use to protect against ESD and physical damage.