Share:
Specifications
SKU: 7083096
| Parameter | Symbol | Min | Typ | Max | Unit | Description |
|---|---|---|---|---|---|---|
| Supply Voltage | VDD | 2.7 | 5.5 | V | Operating supply voltage range | |
| Differential Input Voltage | VID | -0.3 | 0.3 | V | Maximum differential input voltage | |
| Output Voltage High | VOH | 2.4 | 5.0 | V | Output high level voltage (VDD = 5V) | |
| Output Voltage Low | VOL | 0 | 0.4 | V | Output low level voltage (VDD = 5V) | |
| Propagation Delay | tpd | 3.5 | ns | Propagation delay from input to output | ||
| Power Consumption | IDD | 10 | mA | Quiescent supply current | ||
| Operating Temperature | Toper | -40 | 85 | °C | Operating temperature range | |
| Storage Temperature | Tstg | -65 | 150 | °C | Storage temperature range |
Instructions for DS90CR286AMTD:
Power Supply:
- Ensure the supply voltage is within the specified range of 2.7V to 5.5V.
- Use appropriate decoupling capacitors near the power pins to reduce noise and transient effects.
Input Signal:
- Keep the differential input voltage within the limits of ±0.3V to avoid damage or incorrect operation.
Output Configuration:
- Connect pull-up resistors if required by the system design, especially in open-collector configurations.
- Ensure load conditions are compatible with the output voltage levels provided by the device.
Propagation Delay Considerations:
- Account for a typical propagation delay of 3.5ns when designing timing-sensitive applications.
Thermal Management:
- Operate within the specified temperature range (-40°C to 85°C).
- Ensure adequate cooling or ventilation if operating at higher temperatures or in enclosed environments.
Storage:
- Store the device in environments where the temperature does not exceed the storage temperature range (-65°C to 150°C).
Handling Precautions:
- Handle with care to prevent electrostatic discharge (ESD) damage; use proper ESD protection measures during handling and installation.
Inquiry - DS90CR286AMTD
