Share:
Specifications
SKU: 12605956
| Parameter | Description | Value |
|---|---|---|
| Part Number | Full part number | SKD146/16-L100 |
| Type | Type of device | Surface Mount Diode |
| Package | Package type | SOD-123 |
| Forward Voltage (Vf) | Forward voltage at specified current | 0.7V @ 1A |
| Reverse Voltage (Vr) | Maximum reverse voltage | 100V |
| Peak Reverse Current (Irm) | Peak reverse current | 5mA |
| Average Rectified Output Current (Io) | Average rectified output current at 25°C ambient temperature | 1.5A |
| Power Dissipation (Pd) | Maximum power dissipation | 1W |
| Operating Temperature (Tj) | Junction operating temperature range | -55°C to +150°C |
| Storage Temperature (Ts) | Storage temperature range | -65°C to +150°C |
| Thermal Resistance (Rθja) | Thermal resistance from junction to ambient | 125°C/W |
| Capacitance (Cj) | Junction capacitance at 0V bias | 4pF |
| Mounting Position | Recommended mounting position | Any |
| RoHS Compliance | Compliance with RoHS standards | Yes |
Instructions for Use
Handling and Storage:
- Store in a dry, cool place away from direct sunlight.
- Handle with care to avoid mechanical damage.
Soldering:
- Use a soldering iron with a temperature setting of 260°C ± 10°C.
- Soldering time should not exceed 10 seconds per connection.
- Allow the component to cool naturally after soldering.
Electrical Connections:
- Ensure correct polarity when connecting the diode.
- Do not exceed the maximum ratings listed in the table.
Thermal Management:
- Provide adequate heat sinking if operating near maximum power dissipation.
- Monitor the junction temperature to ensure it remains within the specified range.
Testing:
- Use a multimeter or diode tester to verify the functionality of the diode.
- Check for continuity and reverse breakdown voltage as necessary.
PCB Layout:
- Place the diode close to the load to minimize inductance.
- Ensure proper clearance around the component to facilitate cooling.
Environmental Considerations:
- The device is RoHS compliant and suitable for use in environmentally conscious designs.
- Dispose of any waste materials in accordance with local regulations.
Inquiry - SKD146/16-L100
