Share:
Specifications
SKU: 12597226
| Parameter | Description | Value |
|---|---|---|
| Part Number | Component Identifier | AO4614-MS |
| Quantity | Number of Units | 5 pcs |
| Type | Component Type | MOSFET (Metal-Oxide-Semiconductor Field-Effect Transistor) |
| Package | Physical Package | SOT-23-3L |
| VDS (Max) | Drain-to-Source Voltage | 30V |
| VGS (Max) | Gate-to-Source Voltage | ±12V |
| ID (Max) | Continuous Drain Current | 1.7A (at 25°C) |
| RDS(on) | On-State Resistance | 0.08Ω (at VGS = 4.5V) |
| Power Dissipation | Maximum Power Dissipation | 410mW (at 25°C) |
| Operating Temperature Range | Temperature Range for Operation | -40°C to 125°C |
| Storage Temperature Range | Temperature Range for Storage | -65°C to 150°C |
| Gate Charge | Total Gate Charge | 12nC |
| Input Capacitance | Capacitance at Input | 30pF (at VDS = 10V) |
| Output Capacitance | Capacitance at Output | 110pF (at VDS = 10V) |
| Reverse Transfer Capacitance | Capacitance from Drain to Source | 10pF (at VDS = 10V) |
Instructions:
Handling and Storage:
- Store the AO4614-MS in a dry, cool place within the specified storage temperature range.
- Handle with care to avoid static discharge, which can damage the MOSFET.
Mounting:
- Ensure that the PCB layout provides adequate heat dissipation to prevent the MOSFET from exceeding its maximum operating temperature.
- Follow standard soldering procedures to avoid thermal shock and ensure good electrical connections.
Electrical Connections:
- Connect the Drain (D), Source (S), and Gate (G) terminals according to the circuit diagram.
- Ensure that the gate voltage does not exceed the maximum VGS rating to prevent damage to the device.
Testing:
- Use a multimeter or an appropriate test setup to verify the continuity and resistance values before and after installation.
- Test the device under load conditions to ensure it operates within the specified parameters.
Safety:
- Always use appropriate safety equipment when handling electronic components.
- Ensure that the circuit is powered down before making any physical connections or modifications.
Troubleshooting:
- If the MOSFET fails to operate correctly, check for proper connections, correct polarity, and absence of short circuits.
- Verify that the supply voltages and currents are within the specified limits.
For more detailed information, refer to the datasheet provided by the manufacturer.
(For reference only)Inquiry - AO4614-MS(5pcs)
