Share:
BUY JQ1AP-12V-F AJQ8341F https://www.utsource.net/itm/p/12596515.html
| Parameter | Value | Description |
|---|---|---|
| Part Number | JQ1AP-12V-F AJQ8341F | Relay model |
| Coil Voltage | 12V | Rated voltage for the relay coil |
| Coil Power | 0.5W | Power consumption of the relay coil |
| Coil Resistance | 240Ī© | Resistance of the relay coil |
| Contact Form | SPDT | Single Pole Double Throw |
| Contact Rating | 10A at 250VAC | Maximum current and voltage capacity |
| Insulation Resistance | 100MĪ© min | Between contacts and coil |
| Dielectric Strength | 1500VAC | Isolation voltage |
| Operating Temperature | -40Ā°C to +85Ā°C | Ambient temperature range |
| Operating Humidity | 5% to 95% RH | Relative humidity range |
| Mechanical Life | 10 million operations | Expected mechanical operation cycles |
| Electrical Life | 100,000 operations | Expected electrical operation cycles |
| Weight | 10g | Weight of the relay |
Instructions:
- Installation: Ensure the relay is installed in a well-ventilated area within the specified operating temperature and humidity ranges.
- Power Supply: Connect the relay coil to a power supply matching the rated coil voltage (12V).
- Wiring: Wire the common (COM), normally open (NO), and normally closed (NC) terminals according to your circuit requirements.
- Handling: Avoid excessive mechanical stress on the relay during installation and operation.
- Maintenance: Periodically inspect the relay for signs of wear or damage. Replace if necessary.
- Safety: Do not exceed the contact rating to prevent overheating and potential failure.
Inquiry - JQ1AP-12V-F AJQ8341F
