Share:
Specifications
SKU: 12541605
| Parameter | Description | Value |
|---|---|---|
| Part Number | KRC102S | |
| Type | Ceramic Capacitor | |
| Capacitance | Nominal Capacitance | 100 pF |
| Tolerance | Capacitance Tolerance | ±5% |
| Voltage Rating | DC Voltage Rating | 50 V |
| Temperature Range | Operating Temperature Range | -55°C to +125°C |
| Case Size | Capacitor Case Size | 0805 (2012 Metric) |
| Termination | Termination Type | SMD (Surface Mount Device) |
| Dielectric | Dielectric Material | C0G (NP0) |
| Insulation Resistance | Minimum Insulation Resistance at 25°C | 1000 MΩ |
| ESR (Equivalent Series Resistance) | Maximum ESR at 1 MHz | 0.1 Ω |
| DF (Dissipation Factor) | Maximum Dissipation Factor at 1 MHz | 0.1% |
| Lead-Free | RoHS Compliance | Yes |
| Packaging | Packaging Type | Tape & Reel |
| Manufacturer | Manufacturer Name | Kemet |
Instructions for Use
Handling:
- Handle the KRC102S with care to avoid mechanical damage.
- Use appropriate ESD (Electrostatic Discharge) protection measures.
Mounting:
- Ensure the PCB (Printed Circuit Board) is clean and free from contaminants.
- Place the capacitor on the PCB using standard SMD placement equipment.
- Apply solder paste or flux as required.
- Reflow solder according to the recommended temperature profile:
- Preheat: 150°C to 180°C for 60 to 90 seconds.
- Soak: 180°C to 210°C for 60 to 90 seconds.
- Peak: 230°C to 250°C for 10 to 20 seconds.
- Cooling: Rapid cooling to below 100°C within 60 seconds.
Storage:
- Store in a dry, cool environment to prevent moisture absorption.
- Use within 6 months of receipt for optimal performance.
Testing:
- Test the assembled PCB to ensure proper functionality.
- Verify capacitance and voltage ratings using a multimeter or capacitance meter.
Disposal:
- Dispose of the capacitor according to local environmental regulations.
- Recycle where possible.
Inquiry - KRC102S
