Share:
LM358DR2G ON SOP8
Specifications
SKU: 12535173
| Parameter | Description | Value | Unit |
|---|---|---|---|
| Supply Voltage (VCC) | Operating supply voltage range | 3.0 to 32 | V |
| Quiescent Current | Supply current per operational amplifier | 0.4 | mA |
| Input Voltage Range | Common-mode input voltage range | 0 to VCC - 1.5 | V |
| Output Voltage Swing | Output voltage swing (no load) | 0 to VCC - 1.5 | V |
| Input Offset Voltage | Maximum input offset voltage | ±7 | mV |
| Input Bias Current | Input bias current | 45 | nA |
| Slew Rate | Slew rate | 0.5 | V/μs |
| Gain Bandwidth Product | Gain bandwidth product | 1.1 | MHz |
| Operating Temperature Range | Temperature range for operation | -40 to 125 | °C |
| Package Type | Package type | SOP-8 | - |
Instructions for Use
Power Supply:
- Connect the positive supply voltage (VCC) to pin 8 and the negative supply voltage (GND) to pin 4.
- Ensure the supply voltage is within the specified range (3.0 to 32 V).
Input Connections:
- Connect the non-inverting input (pin 3) and inverting input (pin 2) of the first operational amplifier.
- Connect the non-inverting input (pin 6) and inverting input (pin 5) of the second operational amplifier.
Output Connections:
- The output of the first operational amplifier is on pin 1.
- The output of the second operational amplifier is on pin 7.
Biasing and Decoupling:
- Place a decoupling capacitor (e.g., 0.1 μF) close to the power supply pins to filter out noise and ensure stable operation.
- If using single-supply operation, bias the inputs to a suitable midpoint voltage using resistive dividers or other methods.
Temperature Considerations:
- Ensure the device operates within the specified temperature range (-40 to 125 °C).
- For high-temperature applications, consider thermal management techniques such as heat sinks or cooling.
Handling:
- Handle the device with care to avoid static discharge, which can damage the internal components.
- Follow proper ESD (Electrostatic Discharge) handling procedures.
Testing:
- Before finalizing the circuit design, test the operational amplifiers under various conditions to ensure they meet the required performance specifications.
Inquiry - LM358DR2G ON SOP8
