Share:
BUY SKM200GB101D https://www.utsource.net/itm/p/8798798.html
| Parameter | Description | Value |
|---|---|---|
| Device Name | IGBT Module | SKM200GB101D |
| Manufacturer | Infineon Technologies AG | |
| Type | IGBT Module | |
| Package Type | PressFIT, 6-Pin, ISOMOUNT? | |
| Current - Collector to Emitter (Ic) | Continuous Collector Current @ Tc = 25°C | 200 A |
| Voltage - Collector-Emitter (Vceo) | Collector-Emitter Voltage | 1200 V |
| Power Dissipation (Ptot) | Total Power Loss @ Tc = 25°C | 430 W |
| Thermal Resistance (Rth,j-c) | Junction to Case Thermal Resistance | 0.18 K/W |
| Switching Frequency | Recommended Maximum Switching Frequency | 10 kHz |
| Operating Temperature (Tj) | Junction Operating Temperature Range | -40°C to 150°C |
| Storage Temperature (Tstg) | Storage Temperature Range | -55°C to 150°C |
Instructions for Use:
Installation:
- Ensure the mounting surface is clean and flat.
- Apply thermal paste if necessary between the module and heatsink for optimal heat dissipation.
- Tighten the screws evenly to avoid warping.
Electrical Connections:
- Connect the collector, emitter, and gate terminals according to the circuit diagram.
- Verify all connections are secure to prevent arcing or short circuits.
Cooling Requirements:
- Use an adequate heatsink or cooling system to maintain junction temperature within specified limits.
- Monitor temperature during operation to ensure it does not exceed the maximum operating temperature.
Operation:
- Operate within the specified current and voltage limits.
- Avoid rapid changes in current to prevent thermal stress on the device.
Safety Precautions:
- Handle with care to avoid damaging the press-fit pins.
- Use appropriate safety equipment when working with high voltages.
Maintenance:
- Regularly inspect connections and cooling systems.
- Replace any damaged components immediately to prevent further issues.
Inquiry - SKM200GB101D
