Share:
Specifications
SKU: 8647356
Bridge Rectifier Diode, 100A, 1600V V(RRM),
| Parameter | Symbol | Value | Unit |
|---|---|---|---|
| Input Voltage | VIN | 2.5 to 5.5 | V |
| Output Current | IOUT | 0 to 100 | mA |
| Efficiency | η | Up to 95% | % |
| Operating Temperature | TOPR | -40 to 85 | °C |
| Storage Temperature | TSTG | -55 to 125 | °C |
| Quiescent Current | IQ | 10 | μA |
| Output Voltage Range | VOUT | 1.2 to 3.3 | V |
| Load Regulation | ΔVOL | ±1% | % |
| Line Regulation | ΔVOL | ±0.5% | % |
| Dropout Voltage | VDROPOUT | 120 | mV |
| PSRR (at 1kHz) | PSRR | 70 | dB |
| Ripple and Noise | VRIPPLE | 20 | mVp-p |
Instructions for Use:
Input Connection:
- Connect the input voltage (VIN) to the designated pin, ensuring it is within the specified range of 2.5V to 5.5V.
Output Connection:
- Connect the load to the output pins (VOUT). The output current should not exceed 100mA.
Output Voltage Adjustment:
- Use an external resistor network or trimmer potentiometer to set the desired output voltage within the range of 1.2V to 3.3V.
Thermal Management:
- Ensure adequate heat dissipation if operating at high currents or in high ambient temperatures. The operating temperature range is -40°C to 85°C.
Stability:
- For optimal stability, use a 10μF ceramic capacitor between the input and ground, and a 1μF ceramic capacitor between the output and ground.
Power-Up Sequence:
- Apply the input voltage gradually to avoid inrush current and ensure smooth operation.
Storage:
- Store the device in a dry environment within the storage temperature range of -55°C to 125°C.
Handling:
- Handle with care to avoid mechanical damage. Follow ESD (Electrostatic Discharge) precautions to prevent damage to the device.
Testing:
- Before finalizing the design, test the device under various conditions to ensure it meets the required performance specifications.
Inquiry - MDQ100-16
